Certains/tous les MP3 ne fonctionnent pas

MediaMonkey 3.x et 4.x incluent des plugins MP3 (in_dsmp3.dll et in_wmp3.dll respectivement) qui permettent à MediaMonkey d'utiliser le codec MP3 de Windows pour lire des fichiers MP3. Bien que cela fonctionne généralement sans problème, la lecture MP3 peut échouer dans plusieurs cas :

  1. Fichiers MP3 avec des CRC incorrects ou endommagés. Dans ce cas, vous pouvez essayer d'utiliser un autre plugin MP3, comme :
    in_mad.dll : Ce plug-in est excellent, surtout si vous possédez une carte audio prenant en charge une résolution audio de 24 bits ou plus. Cependant, son développement est interrompu. Il est également disponible sur la page des plug-ins d'entrée MediaMonkey :
    http://www.mediamonkey.com/addons/browse/item/mad-input-plugin/

    in_mpg123.dll : Ce plug-in est considéré comme un plug-in de haute qualité, et les incompatibilités de streaming avec MediaMonkey ont été résolues, cependant, il n'est plus activement développé.
    Vous pouvez le trouver à l'adresse suivante : http://otachan.com/in_!mpg123.html

    Si vous remplacez les plug-ins d'entrée MP3 par défaut par l'un des éléments ci-dessus, assurez-vous de supprimer ou de désactiver les plug-ins actuels (par exemple, remplacez in_wmp3.dll par in_wmp3.dll.off).

    Remarque : si vous souhaitez vérifier si un fichier MP3 est endommagé et/ou le réparer, les outils tiers suivants peuvent être utiles :
    http://www.gromkov.com/faq/repair/mp3_validator.html
    http://www.happymonkeying.com/eSupport/vbrfix.zip
  2. Les fichiers ont une extension incorrecte. Par exemple, les fichiers MP2 se voient parfois attribuer une extension MP3 par erreur. Pour ces fichiers, il est conseillé de modifier l'extension en MP2 et d'installer le codec MP2 :
    http://www.mediamonkey.com/addons/browse/item/mp2/
  3. Si votre version de Windows ne comprend pas Windows Media Player ni les codecs valides, aucun fichier audio ne sera lu. Pour résoudre ce problème, vous devrez installer les codecs manquants .
  4. Si Windows Media Foundation et les services système audio sont corrompus (ce phénomène a été observé lors de certaines mises à niveau vers Windows 10), la lecture des fichiers audio sera impossible. Pour résoudre ce problème : a) À l'aide de REGEDIT, vérifiez que la clé « KEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Audiosrv\ » et la clé « DependOnService » ne contiennent que « AudioEndpointBuilder RpcSs » et ne contiennent pas de ligne contenant « MMCSS ». Si c'est le cas, supprimez-la et redémarrez le système. b) Depuis l'invite de commande, utilisez la commande « sfc /scannow » pour réparer les services « Windows Audio » et « Windows Audio Enpoint Builder » s'ils sont manquants ou si leurs paramètres sont corrompus. c) Réinstallez le pilote de la carte son. Désinstallez l'ancien → Redémarrez le système → Laissez Windows installer la version par défaut ou installez la dernière version du fabricant de la carte son (Realtek, C-Media, Connexant, etc.).
  5. Dans certains cas, il se peut que des codecs soient installés, mais mal configurés. Voici un lien vers un court tutoriel sur la correction des codecs Windows : http://www.looprecorder.de/tut_l3codec.php

S'applique à :

Translated automatically (see original)

Some / All MP3s Don’t Play

MediaMonkey 3.x and 4.x include MP3 plugins (in_dsmp3.dll and in_wmp3.dll respectively) that allow MediaMonkey to use Windows’ MP3 codec to play MP3 files. Although this normally works without a problem, there are several cases in which MP3 playback can fail:

  1. MP3 files with bad CRCs or otherwise damaged files. In such cases, you can try using an alternative MP3 plugin such as:
    in_mad.dll: This plug-in is an excellent plug-in especially if you have an audio card capable of 24-bit+ audio resolution, but development of this plug-in is no longer active. It can also be obtained via the MediaMonkey Input Plug-ins page:
    http://www.mediamonkey.com/addons/browse/item/mad-input-plugin/

    in_mpg123.dll: This plug-in is considered to be a high-quality plug-in, and streaming incompatibilities with MediaMonkey have been resolved, however, it is no longer actively developed.
    It can be found at: http://otachan.com/in_!mpg123.html

    If you replace the default MP3 Input-Plug-ins with either of the above, make certain to remove or disable the current plug-ins (e.g. change in_wmp3.dll to in_wmp3.dll.off).

    Note: If you want to verify whether an MP3 is damaged, and/or fix them, the following third party tools may be helpful:
    http://www.gromkov.com/faq/repair/mp3_validator.html
    http://www.happymonkeying.com/eSupport/vbrfix.zip
  2. Files have an incorrect extension. For example, mp2 files are sometimes incorrectly assigned an mp3 extension. For such files, you should change the extension to mp2 and install the mp2 codec:
    http://www.mediamonkey.com/addons/browse/item/mp2/
  3. If you have a version of Windows that doesn’t come with Windows Media Player and valid Codecs, then no audio files will play. To resolve, you’ll need to install the missing codecs.
  4. If Windows Media Foundation and Audio System Services have been corrupted (this has been observed on some upgrades to Windows 10), then all audio files will fail to play. To fix this: a) Using REGEDIT, verify that “KEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Audiosrv\” Key “DependOnService” contains only “AudioEndpointBuilder RpcSs” and does _not_ contain a line with “MMCSS”. If it does, delete it and restart the system b) From the command prompt, use the “sfc /scannow” command to fix both “Windows Audio” and “Windows Audio Enpoint Builder” services if they are missing or have corrupted settings. c) Reinstall the Sound card driver. Uninstall existing -> Restart System -> Let Windows install default or install latest one from sound card chipset manufacturer (Realtek, C-Media, Connexant, …)
  5. In some cases, it may also be that codecs are installed, but that they are misconfigured. Here is a link to a brief tutorial re. fixing Windows Codecs: http://www.looprecorder.de/tut_l3codec.php

Applies to:

Hide original

Cet article vous a-t-il été utile ?