L'appareil MTP (téléphone Android ou lecteur MP3) n'est pas reconnu

La plupart des téléphones et lecteurs de musique Android utilisent le protocole MTP pour la synchronisation via USB. Si l'appareil est branché, mais n'apparaît pas et/ou ne peut pas être parcouru dans MediaMonkey pour Windows ou dans l'Explorateur de fichiers Windows, il se peut qu'il y ait un problème avec la connexion USB ou les communications MTP via USB.

Dans de tels cas, essayez ce qui suit :

  1. Changer de port USB – Souvent, utiliser un autre port USB fonctionne, notamment pour passer du port USB 3.0 au port USB 2.0. Essayez cette méthode même si le port fonctionnait il y a quelques instants.
  2. Changer de câble USB – Parfois, l’utilisation d’un autre câble USB peut également résoudre le problème.
  3. Redémarrez le PC – Souvent, un simple redémarrage suffit.
  4. Assurez-vous que le téléphone Android est configuré pour utiliser MTP :
    1. Une fois branché, déroulez les notifications et appuyez sur la notification USB
    2. Changez-le de « Charger l'appareil », « NDIS », à « MTP »
  5. Assurez-vous que le pilote USB est correctement installé :
  6. est co

Si aucune des solutions ci-dessus n’a fonctionné pour votre Windows 10, vous devrez effectuer certaines opérations.

1. Installez wpdmtp.inf

  • Maintenez la touche Windows enfoncée, puis appuyez sur R. Saisissez %systemroot%\INF dans le champ et appuyez sur Entrée. (Vous pouvez également utiliser l'explorateur de fichiers et accéder manuellement à C:\Windows\INF.)
  • Tapez wpdmtp.inf dans la barre de recherche située à droite de la barre d’adresse dans Windows 10.
  • wpmdmtp.inf est un fichier lié à MTP et son installation manuelle peut éventuellement résoudre vos problèmes, en particulier lorsque vous avez déjà vu le message d'erreur « Une section d'installation de service dans ce fichier INF n'est pas valide ».
  • Faites un clic droit sur le fichier wpmdmtp.inf et sélectionnez Installer. Cliquez sur Oui si la question « Souhaitez-vous autoriser cette application à modifier votre appareil ? » s'affiche.
  • Cela devrait aller assez vite et une fois terminé, essayez à nouveau de connecter votre périphérique MTP.

2. Installez le pilote de périphérique USB MTP

  • Maintenez la touche Windows enfoncée et appuyez sur R. Dans la boîte de dialogue Exécuter qui s'ouvre, saisissez devmgmt.msc et appuyez sur Entrée. Le gestionnaire de périphériques s'ouvre. (Vous pouvez également appuyer sur la touche Windows et saisir « Gestionnaire de périphériques » pour le rechercher.)
  • Développez « Appareils portables » et recherchez votre appareil. Si vous n'y parvenez pas, essayez également de chercher sous « Autres appareils », car certains utilisateurs le trouvent également. Assurez-vous également que votre appareil MTP est connecté à votre PC, sinon il ne s'affichera pas.
  • Cliquez dessus avec le bouton droit de la souris et choisissez Mettre à jour le logiciel du pilote.
  • Sélectionnez Parcourir mon ordinateur pour rechercher un logiciel pilote.
  • Cliquez sur « Laissez-moi choisir parmi une liste de pilotes de périphériques sur mon ordinateur ».
  • Parmi les options proposées, sélectionnez « Périphérique USB MTP » et cliquez sur « Suivant ». Suivez l'assistant d'installation pour l'installer.

3. Téléchargez et installez le Media Feature Pack

Cette mise à jour est principalement destinée aux versions N et KN de Windows 10, qui ne proposent pas Windows Media Player ni certaines technologies associées. Dans certains cas, l'installation du Media Feature Pack peut également résoudre le problème. Il vous suffit de télécharger la mise à jour appropriée sur le site web de Microsoft, de l'installer et de redémarrer votre PC. Si votre PC est en 64 bits, téléchargez le fichier Microsoft-Windows-MediaFeaturePack-OOB-Package_x64.msu (108,9 Mo). Sinon, téléchargez le fichier Microsoft-Windows-MediaFeaturePack-OOB-Package.msu (72,4 Mo).

Vous n'êtes pas obligé de suivre toutes les méthodes mentionnées ci-dessus, et l'une des trois méthodes ci-dessus résoudra probablement votre problème. Choisissez celle avec laquelle vous êtes le plus à l'aise.

Translated automatically (see original)

MTP Device (Android Phone or MP3 Player) isn’t Recognized

Most Android phones or music players use the MTP protocol to sync over USB. If the device is plugged in, but doesn’t show up and/or can’t be browsed in MediaMonkey for Windows or in Windows File Explorer, there may be a problem with the the USB connection, or the MTP communications that occur over USB.

Try the following in such cases:

  1. Switch USB Ports – Often, using another USB port works, especially switching between the USB 3.0 port to USB 2.0. Try this even if the port was working a moment ago.
  2. Switch USB cables – Sometimes, using another USB cable can also fix the problem.
  3. Restart the PC – Often, a nice and sweet reboot is all it takes.
  4. Make sure that the Android phone is configured to use MTP:
    1. When it’s plugged in, pull down the notifications and tap the USB notification
    2. Change it from ‘Charge device’, ‘NDIS’, to ‘MTP’
  5. Make sure that the USB driver is installed correctly:
  6. is co

If none of the above worked for your Windows 10, you will need to perform some operations.

1. Install wpdmtp.inf

  • Press and hold the Windows Key and while holding it, press R. Type %systemroot%\INF in the box and hit Enter. (Alternatively, you could just use the file explorer and manually go to C:\Windows\INF)
  • Type wpdmtp.inf in the search bar provided to the right of the address bar in Windows 10.
  • wpmdmtp.inf is a file related to MTP and installing it manually can possibly resolve your issues, especially when you have previously seen the error message “A service installation section in this INF is invalid“.
  • Right-click on the wpmdmtp.inf file and select Install. Click Yes if asked, “Do you want to allow this app to make changes to your device?”
  • It should go rather quick and once it’s done try connecting your MTP device again.

2. Install the MTP USB Device Driver

  • Press and hold the Windows key and press R. In the run dialogue box that opens, type devmgmt.msc and hit Enter. This will open the device manager. (Alternatively, you can also press the Windows key and type Device manager to search for it.)
  • Expand Portable devices and find your device. If you can’t, try looking under Other devices as well because it is under that for some users. Also, make sure your MTP device is connected to your PC, otherwise it won’t show.
  • Right-click it, and choose Update Driver Software.
  • Select Browse my computer for driver software.
  • Click on Let me pick from a list of device drivers on my computer.
  • From the options presented, select MTP USB Device, and click next. Follow the installation wizard to install it.

3. Download and install the Media Feature Pack

This update is primarily meant for N and KN versions of Windows 10 which do not offer the Windows Media Player as well as some related technologies to the end user. In some cases, installing the Media Feature Pack might solve the issue as well. All you have to do is download the appropriate update from Microsoft’s Website, install it and reboot your PC. If your PC is 64-bit, download Microsoft-Windows-MediaFeaturePack-OOB-Package_x64.msu which is a 108.9MB package otherwise download the 72.4MB package named Microsoft-Windows-MediaFeaturePack-OOB-Package.msu.

You don’t necessarily have to follow all of the aforementioned methods and most probably any one of the above three methods will solve your problem. Pick anyone you are more comfortable with.

Hide original

Cet article vous a-t-il été utile ?